RV Fresh Water - 5/8 Inch

Campground hookups often sit too low to the ground, forcing your hose into a sharp bend that restricts flow. The 90-degree adapter changes the angle at the faucet, preventing kinks and keeping water moving through your Blu Tech filter or softener.

Most campgrounds only give you one faucet, but you may need more than one line. This splitter turns one water source into three, so you can run your filter system, flush your black tank, and still have a line free for rinsing gear or washing your RV.

Replace or install a new fitting on a Valterra ABS plastic fresh-water tank. 90-Degree elbow has a collar to attach to 1-1/2" MPT inlet on the tank and a barbed connection for 3/4" hose.

Prevent your water hose from crimping and impeding flow with this 90-degree brass elbow that connects to your RV's water intake fitting. Removable screen filter helps keep debris out of water system. Fits hoses with a 3/4" diameter fitting.

Need to connect a 3/4' PEX water line to a 3/4' threaded hose or fitting? The Flair-It male adapter goes on fast. Just press on and hand-tighten for a leak resistant seal. You'll be ready to head out for your next adventure in no time.

Need to connect a 3/4' PEX water line to a threaded 3/4" fitting in your RV? The Flair-It female adapter installs in minutes; just hand-tighten for a leak resistant seal and get back on the road.

Prevent your water hose from crimping and impeding flow with this 45-degree brass elbow that connects to your RV's water intake fitting. Removable screen filter helps keep debris out of water system. Fits hoses with a 3/4" diameter fitting.

Quick-connect brass plug connects to your RV's city water inlet to completely remove water from your water lines and keep antifreeze from diluting when you winterize. Simply open all drains and faucets and apply air pressure through the plug.

Brass plug screws into your RV's city water inlet to completely remove water from your water lines and help keep antifreeze from diluting when you winterize. Simply open all drains and faucets and apply air pressure through the plug.

Adding a new fixture or rerouting water in your RV? The Flair-It T-connector makes it easy to create new lines for a kitchen upgrade or installing an outdoor shower. No special tools required - just hand-tighten and get back to your adventure.

Adding a new fixture or rerouting water in your RV? The Flair-It T-connector makes it easy to create new lines for a kitchen upgrade or installing an outdoor shower. No special tools required - just hand-tighten and get back to your adventure.

Replace or install a new fitting on a Valterra ABS plastic fresh-water tank. 90-Degree elbow has a barbed connection for 3/4" hose. Flange attaches to fresh-water tank with ABS cement for leak-proof installation.

This 90-degree elbow helps eliminate strain on your water hose, extending the life of the hose. Perfect for RVs, the elbow connects to the water intake fitting. Or you can use it around the house. Brass construction is tough and durable.

Adding a new fixture or rerouting water in your RV? The Flair-It T-connector makes it easy to create new lines for a kitchen upgrade or installing an outdoor shower. No special tools required - just hand-tighten and get back to your adventure.

Let your bathroom sink function as a convenient attachment point for using a black tank rinser or sprayers for cleaning your RV bathroom. Standard sized threads fit most bathroom sinks.

Need to fix or join 3/4" copper water lines in your RV? This Flair-It compression fitting installs by hand. Just slip the nuts and rings on the pipes, and tighten the nuts for a secure, leak resistant seal with no special tools.

Adding a new fixture or rerouting water in your RV? The Flair-It T-connector makes it easy to create new lines for a kitchen upgrade or installing an outdoor shower. No special tools required - just hand-tighten and get back to your adventure.

Need to connect a 1/2' PEX water line to a 3/4' threaded hose or fitting? The Flair-It male adapter goes on fast with no tools, just hand-tighten for a secure, leak resistant seal.

Plastic plug screws into your RV's city water inlet to completely remove water from your water lines and help keep antifreeze from diluting when you winterize. Simply open all drains and faucets and apply air pressure through the plug.

Need to go from a 3/4' to a 1/2' water line in your RV? The Flair-It reducing coupler makes it easy. Just press on, hand-tighten, and you're ready for your next adventure.

Need to fix or join a 3/4' water line in your RV? This Flair-It straight coupler makes repairs fast. Just hand-tighten for a leak resistant seal and get your plumbing back in shape with no special tools.

This 45-degree elbow helps eliminate strain on your water hose, extending the life of the hose. Perfect for RVs, the elbow connects to the water intake fitting. Or you can use it around the house. Brass construction is tough and durable.

Easily pump antifreeze into your RV's water lines during winterization with this hand pump. Connect hose to your RV's city water inlet and pump in from antifreeze container. Extension tube lets you reach the bottom of antifreeze containers.

Replacing old gray PB pipe with PEX in your RV? This Flair-It coupler makes the transition easy. Slide on the nuts, press on the pipes, hand-tighten for a leak resistant seal, and travel with peace of mind.